Bespoke wardrobes and walk-in closets in Barcelona

We design and build fitted wardrobes and dressing rooms adjusted to the millimetre to your home, with premium hardware and installation by our own team.

In Eixample, Gràcia or Sarrià apartments there is not a single square wall. A catalogue wardrobe leaves gaps, cut skirtings and dead corners; a bespoke one uses the ceiling up to the last moulding and follows the real geometry of the home.

We work with laser surveys, our own cutting lists and dust-free installation. From the first drawing to the finished unit there is a single responsible team: we do not coordinate suppliers, we manufacture and install.

What we build

Every piece is designed around the real opening in your home, not around standard modules.

Fitted wardrobe

Uses an existing recess or creates one with a new stud wall, floor to ceiling, with an interior planned around your clothes rather than a catalogue.

Open or closed dressing room

A dedicated room or zone with open modules, hanging rails, velvet-lined drawers, central island and LED lighting on rails and shelves.

Under-stair and attic storage

Impossible spaces are where bespoke pays off most: pull-out drawers, mitred doors and full use of the space under the roof pitch.

Fronts and doors

Coplanar sliding, push-to-open hinged, matt lacquer, walnut or oak veneer, reeded glass and anodised aluminium profiles.

Complementary storage

Entrance halls, bookcases, TV units and laundry cupboards in the same material palette for continuity across the home.

What makes a wardrobe genuinely bespoke

Branded hardware

Full-extension soft-close runners, hinges and sliding systems from German or Austrian manufacturers, with spare parts guaranteed for years.

Boards and edges

Moisture-resistant board in wet areas, 1–2 mm ABS edging bonded with PUR glue and interiors in wood texture or lacquer, not printed paper.

Integrated lighting

LED profiles on hanging rails and under shelves with opening sensors, warm colour temperature and concealed power supply.

Planned interior

Sized by garment: dress and coat lengths, shirt drawers, angled shoe racks, jewellery trays and luggage space.

From measurement to installation

1. Visit and survey

Laser measurement of the opening, plumb checks, ceiling heights and location of concealed services.

2. Design and render

Interior layout proposal, scaled elevations and a render to approve fronts, materials and handles before manufacturing.

3. Manufacturing

Cutting and machining in the workshop, with dimensional control and dry assembly of critical pieces.

4. Installation

One or two days per wardrobe, with extraction, floor protection and final adjustment of doors and drawers.

Indicative price per linear metre

Barcelona market references for bespoke manufacture and installation, VAT excluded. Price varies with height, front type and interior fittings.

ItemIndicative range
Fitted wardrobe with hinged doors€900 – 1,500 / linear m
Wardrobe with coplanar sliding doors€1,200 – 2,100 / linear m
Open dressing room with modules and lighting€1,300 – 2,400 / linear m
Dressing room central island€2,500 – 6,500
Matt lacquer or natural veneer front (surcharge)15 – 35 %

Indicative manufacturing and installation prices. The final quotation is issued after on-site measurement and selection of materials and hardware.

Frequently asked questions

How much does a bespoke wardrobe cost in Barcelona?

A fitted wardrobe with hinged doors runs between €900 and €1,500 per linear metre installed, and coplanar sliding doors between €1,200 and €2,100. A complete dressing room with lighting and an island typically starts at €6,000.

How long does it take from order to installation?

Five to eight weeks: one week for design and approval, three to five weeks of workshop manufacturing and one or two days of installation per wardrobe.

What is the difference between bespoke and modular wardrobes?

Modular systems use fixed widths and leave trims and dead space; a bespoke wardrobe is built to the real dimensions of the opening, reaches the ceiling and absorbs out-of-plumb walls and mouldings, which is standard in Barcelona's period buildings.

Can you use an irregular or under-stair space?

Yes, and that is where bespoke manufacturing pays off most: pull-out drawers, mitred fronts and modules of varying depth to use the attic or the under-stair volume fully.

What hardware do you use?

Full-extension soft-close runners and sliding systems from German or Austrian manufacturers, with long-term spare part availability. Hardware is what decides whether a wardrobe still works well after ten years.

Do you install outside the city of Barcelona?

Yes, we work across the metropolitan area, Maresme, Vallès and Costa Brava. Beyond that we assess it according to the size of the commission.

Tell us which space you want to use.

We visit your home, measure it and propose an interior layout and materials with a fixed quotation.

Other locations

Same team, same site supervision and the same standards in every destination.