We design and build bespoke high-end kitchens for apartments and houses across Madrid, from Salamanca to La Moraleja.
A luxury kitchen in Madrid nearly always meets an existing building first: period apartments in Salamanca or Chamberí with generous ceilings and services that need rebuilding, or villas in La Moraleja and Puerta de Hierro where the kitchen has to work with the living room and a back kitchen.
We work with our own joinery workshop, so drawing, manufacturing and installation sit under one responsibility. Natural stone, veneers, matt lacquers and premium appliances specified for how the kitchen is actually used, not for a catalogue.
Drainage, ventilation, electrical capacity and gas checked before a single line is drawn.
Construction drawings plus stone, veneer and ironmongery selection with physical samples.
In-house cabinetry: millimetre adjustments against the walls of a period building, which are never straight.
Trade coordination, stone templating and fitting, and appliance start-up.
In Salamanca and Chamberí, building-community consents and works hours drive the programme.
Three metres and up: the kitchen should run to the top rather than leave a dust shelf above.
In northern villas, splitting the show kitchen from the working one changes the whole layout.
Wide swings in humidity: solid timber needs controlled moisture and calculated joints.
1900–1930 apartments with service kitchens facing the courtyard. We recover square metres by opening into the pantry and move ventilation to a shaft approved by the building.
Ceilings of 3.20 to 3.60 m: cabinetry runs to the ceiling with assisted-opening top units instead of a dead bulkhead.
Townhouses with separate kitchen and pantry; we usually split cooking and washing zones into two independent runs.
Islands of 3.5 to 4.5 m with a single-slab worktop and special transport, coordinating crane access or removing joinery.
Housing built in the last 20 years: sound services and roof extraction, which allows direct-vent hoods at 800 m³/h.
Kitchens of 6 to 9 m² in walk-up buildings: we manufacture in modules that fit the stairs and assemble them on site.
Three variables drive the number: linear metres of cabinetry, worktop material and appliance level. Floor area is only a quick reference.
The real unit of measure: €1,400 – €2,800 per linear metre manufactured and installed, depending on natural veneer, matt lacquer or stone combinations.
Indicative against room area: €1,800 – €3,200 per m² in a renovated apartment and €2,500 – €4,500 per m² in a house kitchen with pantry.
€180 – €450 per m² in natural stone and €200 – €500 per m² in large-format porcelain, templating and fitting included.
€8,000 – €25,000 for a full premium set. Decided after the cutting list, not before.
New plumbing and wiring, builder's work, flooring and painting are quoted as construction and add €6,000 to €20,000 in an apartment.
References against room area, cabinetry manufactured and installed. Worktop and appliances separate.
| Kitchen type | Price per m² | Lead time |
|---|---|---|
| Renovated apartment (8 – 14 m²) | €1,800 – €3,200 per m² | 8 – 12 weeks |
| Penthouse or new-build home | €2,000 – €3,500 per m² | 8 – 12 weeks |
| House with pantry (18 – 30 m²) | €2,500 – €4,500 per m² | 12 – 16 weeks |
| Natural stone worktop | €180 – €450 per m² | 10 – 15 days |
| Large-format porcelain worktop | €200 – €500 per m² | 10 – 15 days |
Complete kitchen including manufacturing and installation. High-end appliances quoted separately.
| Scope | Indicative range |
|---|---|
| Design and project management | 2,500 – 7,000 EUR |
| Bespoke apartment kitchen | 25,000 – 60,000 EUR |
| Villa kitchen with back kitchen | 60,000 – 150,000 EUR |
| Natural stone worktop | 180 – 450 EUR / m² |
Between €1,800 and €3,200 per m² in a renovated apartment and €2,500 to €4,500 per m² in a house with pantry, cabinetry manufactured and installed. The worktop is separate, €180 to €500 per m² depending on material.
Between 25,000 and 60,000 EUR for an apartment and 60,000 to 150,000 EUR for a villa with a back kitchen, installation included and appliances quoted separately.
Manufacturing takes 8 to 14 weeks after drawings are signed off, installation 3 to 5 days, and a full project 14 to 20 weeks.
Yes. We check drainage, ventilation and electrical capacity first, then build cabinetry to walls that are rarely square.
Natural stone for character, large-format porcelain for stain and heat resistance. We compare both on samples before deciding.
Yes: La Moraleja, Pozuelo, Boadilla, Las Rozas and the sierra, plus Barcelona and Málaga from our other studios.
A minor works notification is usually enough unless structure or façade changes. We handle the paperwork.
Before requesting a quote, read our practical guide to the decisions that make the difference in an exceptional kitchen:
Every material has its technical guide with prices per m², thicknesses and real maintenance. Each one has its own form to request a quote or samples:
If you would rather speak to a person, our opening hours, phone and email are on the contact page.
Send us the floor plan and a photo of the space and we will come back with a first approach and a budget range.